{"product_id":"cdd-obs-bricknose-idi-intercooler-kit","title":"CDD OBS \u0026 Bricknose IDI Intercooler Kit","description":"\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e CDD OBS \u0026amp; Bricknose IDI Intercooler Kit. Match your engine, chassis, transmission and turbo configuration to the details below.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFulfillment:\u003c\/strong\u003e Supplier-sourced from Classic Diesel Designs. Availability and any manufacturer build time apply; this listing does not indicate stock held at PSC.\u003c\/p\u003e\u003ch2\u003eManufacturer information — Classic Diesel Designs\u003c\/h2\u003e\u003cp\u003eThe CDD intercooler kits are designed to fit 87-94 F-Series and Bronco IDIs equipped with factory turbo, CDD or 093 turbo kits. This kit upgrades the factory intake, coolant reservoir and adds a charge air cooler to significantly drop egts, improve performance and especially help with towing heavy loads. Customers typically see a 4-600* drop in EGTs, an increase in power and a decrease in overall coolant temps.\u003c\/p\u003e\u003cp\u003eThe restrictive factory intake box is removed to make room for the intercooler piping, and gets replaced by a large 4\" polished intake with a CDR vent port, high flow blue 6637 intake filter and filterwerks waterproof prefilter to extend the service life of the main filter to over 15k miles. The new air filter sits in place of the factory plastic coolant overflow, which is replaced with the CDD aluminum coolant overflow. For the charge piping we use 2.5\" thick wall polished aluminum piping, tig welded in jigs for the least possible boot connections and tested to 140 psi. The provided t bolt clamps are a high quality stainless that wont rust or strip, and the intercooler is a 31x12x3\" air to air intercooler mounted in front of the cooling stack, retaining the factory AC in place.\u003c\/p\u003e\u003cp\u003eOptions\/Add-ons (selected in drop downs below)\u003c\/p\u003e\u003cp\u003eCharge Pipe to Intake Manifold Connection\u003c\/p\u003e\u003cp\u003eCDD Intake Hat (Silicone boot connection for use with stock non turbo intake manifold)\u003c\/p\u003e\u003cp\u003eCDD V-Banded Intake Manifold (Hard plumbed V band connection w\/ modified CDD intake manifold for high boost applications)\u003c\/p\u003e\u003cp\u003eTurbo Compressor Housing Size\u003c\/p\u003e\u003cp\u003eStock T04B (2\" Outlet, stock 093 or factory IDIT turbo)\u003c\/p\u003e\u003cp\u003eT04S\/T04Z (2.5\" Outlet, use with any stage 2 or 3 CDD turbo)\u003c\/p\u003e\u003cp\u003eImportant Notes:\u003c\/p\u003e\u003cp\u003eThe piping requires some trimming on the core support, see above images and instructions .pdf\u003c\/p\u003e\u003cp\u003eWhen intercooling a turbo kit that has a stock or stage one turbo charger, the stock intake hat is replaced with a CDD intake hat, and the compressor housing needs to be slightly clocked to work with the piping.\u003c\/p\u003e\u003cp\u003eWhen intercooling a turbo kit that has a T04S or T04Z front cover, (Stage 2-3 turbos) the kit will come with the correct boot for the 2.5\" outlet instead of the stock outlet size.\u003c\/p\u003e\u003cp\u003eFits OBS 1992-1997 F-Series and Bronco (w\/ factory diesel core support) and Bricknose 1987-1991 F-Series and Bronco (w\/ factory diesel core support)\u003c\/p\u003e\u003cp\u003eCDD OBS \u0026amp; Bricknose IDI Intercooler Kit Installation Instructions:\u003c\/p\u003e\u003cp\u003eLINK\u003c\/p\u003e\u003cp\u003eDonaldson Blue® 6637 Filter Info:\u003c\/p\u003e\u003cp\u003eDonaldson Blue® air filters with Ultra-Web® nanofiber technology protect engines by providing better initial and overall efficiency compared to conventional cellulose media. Donaldson invented air filters for heavy-duty diesel engines over 100 years ago and were the first to develop nanofiber air filter media for the diesel engines, with more than 20 years of proven performance.\u003c\/p\u003e\u003cp\u003eBenefits\u003c\/p\u003e\u003cp\u003eLonger Engine Life - Donaldson Blue™ air filters provided better engine protection by allowing much less contaminant to pass through than cellulose air filters but still maintaing a higher flow rate\u003c\/p\u003e\u003cp\u003eLonger Filter Life - Smaller interfiber spaces of Ultra-Web® nanofiber technology hold more submicron contaminant than conventional filters with cellulose media, delivering longer filter life\u003c\/p\u003e\u003cp\u003eIncreased Flow - Utilizing the nanofiber Ultra-Web® media has allowed for a 37% increase in flow over the standard 6637 cellulose filter. It has also been tested to flow over 1300 CFM+.\u003c\/p\u003e\u003cp\u003eMedia Type\u003c\/p\u003e\u003cp\u003eUltra-Web® Nanofiber Technology -- Exclusively in Donaldson Blue air filters\u003c\/p\u003e\u003cp\u003eEngineered to perform in extreme temperature and humidity conditions, unlike ordinary nanofibers and cellulose which aren't hydrophobic\u003c\/p\u003e\u003cp\u003eProven in the real world – used in diesel engines for nearly two decades\u003c\/p\u003e\u003cp\u003eOn-road applications are guaranteed to go twice the distance compared to standard cellulose filters\u003c\/p\u003e\u003cp\u003e100% Made In The USA\u003c\/p\u003e","brand":"Classic Diesel Designs","offers":[{"title":"CDD Intake Hat \/ Stock T04B (2\" Outlet)","offer_id":60165263720734,"sku":"CDD-42445500940532","price":1705.0,"currency_code":"USD","in_stock":true},{"title":"CDD Intake Hat \/ T04S\/T04Z (2.5\" Outlet)","offer_id":60165263753502,"sku":"CDD-42445500973300","price":1710.5,"currency_code":"USD","in_stock":true},{"title":"CDD V-Banded Intake Manifold \/ T04S\/T04Z (2.5\" Outlet)","offer_id":60165263786270,"sku":"CDD-42445501038836","price":2035.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/0199\/6062\/files\/upload-1791378491279.jpg?v=1791378493","url":"https:\/\/pscrepair.com\/products\/cdd-obs-bricknose-idi-intercooler-kit","provider":"Powerstroke Central ","version":"1.0","type":"link"}